OD.2500mm 40mm thick carbon steel pipe bending hydraulic machine -

OD.2500mm 40mm thick carbon steel pipe bending hydraulic machine

Model No.︰YWG-2500-40

Brand Name︰Fengliyuan

Country of Origin︰China

Unit Price︰US $ 100000 / set

Minimum Order︰1 set

Inquire Now

Product Description

φ2500 mm * 40mm hydraulic pipe bending machine

A The main function of the pipe bending machine

1 Pipe heat by the induction coil induction，can be bend by radius less than 6D and bigger than the 3D bend, maximum bending Angle is 180 °, the largest diameter 2500 mm, maximum thickness of 40 mm.

Material: low carbon steel, medium carbon steel pipe, alloy steel pipe, stainless steel pipe. Seamless, straight seam, and spiral pipe.

2 The front fixture open, lock, fixture head turning, radius adjustment are all hydraulic drove, through the button control.

3
4

5 There are infrared thermometer for real-time monitoring of the heating tube, Keep pace with the speed to set Angle and automatically stop after that.

6 The output transformer is above the roller shelf，To facilitate the adjustment of the heating coil ( electric up and down adjustment, manual fine tuning left and right).

7 The whole machine focused on the control console (buttons and touch screen operation).

B The main technical parameters and features medium frequency power supply:

Power supply rated output power: 1500 KW;

Rated output frequency: 500-1000 HZ;

The rated output voltage: 750 V;

The rated input voltage: 380 V - 450 V;

The rated dc current: 3000 A.

1 Medium frequency power supply from the main circuit to control circuit, is to use an adaptive digital control circuit, All control circuit for the three-phase bridge rectifier part, inverting part is parallel inverter, inverter Power rating from 5% - 100% range stepless adjustable.

2 Starting with reliable performance, No matter any artifacts in the inductor it can start reliably

3 Has a good stable performance. Current device used for the inner ring and intermediate frequency voltage for outer ring of the closed-loop system. When the input voltage fluctuations in the plus or minus 10%, stable output voltage accuracy + / - 1%, Thus ensure the consistency of the steel temperature inside the inductor during the heating process.

4 Has overcurrent, overvoltage, water pressure, the fuse are short etc，multiple protection, Effectively protect the safety of power electronic devices.

5 All integrated device mounted on a panel.

6 The inward lines without the phase sequence and no polarity outgoing requirements. Starting is zero voltage starting, no current shock.

C Environment and working conditions

1 Environmental factors

Indoor temperature: top 40 ℃, 5 ℃ lowest; Air humidity: 98% or less (no frost);

2 Cooling water quality: life used tap water.

3 Within 20 days after the contract signing, the pipe bending machine foundation drawings supplied by the supplier.

E-Mail: flygjsb@126.com

Skype：shonepole

Mobile:0086-13283260069

TEL:+86-317-6193236/6193226

Yanshancounty Fengliyuan Pipe Fittings Equipment Manufacture Co.,Ltd （CN）