our products

Product Catalog

steel pipe and bar induction heating bending machine

Model No.︰	YWG-8
Brand Name︰	Fengliyuan
Country of Origin︰	-
Unit Price︰	US $ 50000 / set
Minimum Order︰	1 set

Total 20 Related Items

Product Description

The Main Technical Parameters of The Pipe Bending Machine

1、 Master cylinder： inside diameter: φ250mm diameter of the rod: φ210mm

effective strock:12m the max thrust of the 2 cylinders 210T.

The other smaller cylinders: φ125mm 2 pieces.

2、 Hydraulic pump station

a、station configuration: 25scy plunger pump 1 set 、 7.5KW Motor 1 set ( to converse frequency

adjust the speed of the master pump)

PV2R13-17-116 gear pump 1 set 、15KW Motor 1 set ( fast forwad and backward，to guide clamp wheel、fixture motor).

The working speed ; 0-20cm/min , the maxmum backward speed:300cm/min

3、The guiding part of the main machine is controled by four wheels, the clamp holding different size run

By the hydraulic motor, it open and closed drived by the oil cylinder, the oil cylinder drive the the rocking arm to adjust the bending radius.

4、Medium—frequency power supply：600 KW, 500-1000HZ.

The total power of the machinery part: 25KW,380V or 220V,50HZ or 60 HZ

5、Assembly parts

a、clamp wheels （four for the round pipe and four for the square pipe）、fixture made of 45# cast steel

b、master fuselage、weldment、the main pushing board are welded board

c、screw、chain、standard parts and bearing are national standards

d、the guider is dovetail groove slide plate mode

e, The effective length of the bending radius adjust device is 30m (the part in the groun and the turning arm)

6、PLC （Siemens）

Angle setting show、distance and speed setting show、temperature show、with memory storage function，the bending angle sensed from the encoder，the terminal showed by the touch screen，During bending, computer records bending status at all times，Put the angle degree via the touch screen.With the infrared thermometer. The data and image of whole process can be stored and printed..